Products

Solutions

Community

Blog

Company

Contact

Trayd vs. eBacon | Construction Payroll Compared

Trayd vs. eBacon: Certified Payroll and Job Costing Software Compared

Anna Berger

Founder & CEO

Choosing between construction payroll platforms means understanding what each one was built to do and where each one stops. Trayd and eBacon both serve construction contractors, and both handle certified payroll and prevailing wage compliance. Beyond that shared ground, the two platforms take fundamentally different approaches to what a construction back office needs.

Trayd is a full back-office operating system that unifies payroll, HR, accounting, compliance, field tracking, scheduling, and job costing in a single platform built for trade contractors. eBacon is a construction payroll and compliance platform focused on certified payroll reporting, prevailing wage automation, and fringe benefit management, designed to work alongside a contractor's existing accounting software rather than replace it.

The right choice depends on what the contractor's back office looks like today and what it needs to support as the company grows.

Certified Payroll and Prevailing Wage Compliance

Both platforms address the core compliance challenge that construction-specific payroll must solve: applying the correct prevailing wage rate by project, classification, and wage determination, then generating accurate certified payroll reports.

Where Both Platforms Deliver

Trayd and eBacon both generate WH-347 federal certified payroll reports and state-equivalent forms from payroll data. Both platforms apply prevailing wage rates by job and classification, reducing the manual effort that generic payroll tools require on Davis-Bacon projects. Capabilities shared by both platforms include:

  • Automated prevailing wage rate application by project, trade classification, and wage determination

  • WH-347 and state certified payroll form generation from payroll data

  • Multi-state prevailing wage support for contractors working across jurisdictions

  • Field time tracking that captures hours by project at the point of entry

For contractors whose primary pain point is certified payroll reporting, both platforms represent a significant improvement over spreadsheet-based or manual processes.

Where the Platforms Differ

eBacon includes a bona fide fringe trust, which allows open-shop and merit-shop contractors to direct prevailing wage fringe contributions into benefits for their crews rather than paying the fringe amount as taxable cash. According to eBacon's publicly available materials, the fringe trust is a distinctive capability that can lower payroll taxes and wage-based costs on prevailing wage projects.

Trayd approaches prevailing wage compliance as one component of a broader back-office system. Certified payroll data draws from the same labor tracking and payroll infrastructure that feeds job costing, financial reporting, and workforce management, rather than operating as a standalone compliance tool.

Job Costing and Financial Reporting

How deeply each platform connects payroll data to project-level financial reporting is one of the most significant differences between the two.

eBacon's Approach

eBacon provides job costing capabilities that track labor costs by project. Employees log hours for each project task within the platform, and the data feeds into job-level cost reporting. eBacon is designed to work alongside a contractor's existing accounting software, handling the payroll and compliance functions that generic accounting tools cannot, while the accounting system continues to manage the general ledger, accounts payable, accounts receivable, and financial statements.

Trayd's Approach

Trayd includes a full construction accounting suite with a ​general ledger, accounts payable and receivable, financial statements, and cash management alongside construction job costing. Labor costs flow from field tracking through payroll into the general ledger and job cost reports within the same system, without requiring integration between separate accounting and payroll platforms.

For contractors who currently run QuickBooks or another general accounting tool alongside their payroll system, Trayd replaces both. For contractors who want to keep their existing accounting software and add construction-specific payroll on top, eBacon is designed for that architecture.

Union Payroll and Workforce Management

The two platforms serve different segments of the construction workforce, and those differences affect which features each platform prioritises.

Union Contractor Support

Trayd was built for the complexity of union trade contracting, including union logic, collective bargaining agreement compliance, multi-trade classification management, and union reporting. For contractors managing union labor on federally funded and public works projects, Trayd handles the intersection of union payroll rules and prevailing wage requirements natively.

eBacon positions itself as a platform for open-shop and merit-shop contractors. The fringe trust feature, which is a core differentiator, is specifically designed for non-union contractors who need a compliant vehicle for prevailing wage fringe benefit management. Union payroll is not prominently featured in eBacon's publicly available product materials.

HR, Onboarding, and Scheduling

Trayd includes a full ​HR and people management suite covering onboarding, benefits administration, approvals, and digital forms, alongside crew scheduling and dispatch and ​field and labor tracking applications for workers and foremen. eBacon includes HR, scheduling, safety, and inventory modules within its platform, though its core positioning centers on payroll and compliance rather than full workforce management.

Platform Scope: Standalone Payroll vs. Back-Office Operating System

The most fundamental difference between the two platforms is scope.

eBacon: Payroll and Compliance Layer

eBacon is designed to handle the parts of construction payroll that generic tools cannot: prevailing wage rate management, certified payroll reporting, fringe benefit compliance, and field time capture. Contractors keep their existing accounting software and add eBacon for the construction-specific payroll and compliance layer. According to eBacon's website, "your accounting software keeps doing the accounting, and eBacon takes over the parts it was never built for."

Trayd: Unified Back-Office System

Trayd replaces the patchwork of disconnected tools, combining ​payroll, HR, compliance, accounting, and job costing into one platform. For contractors managing union labor, prevailing wages, multi-state compliance, and high-volume field crews, the unified approach means data flows from the jobsite through payroll into the financial ledger without integration gaps or manual data transfers between systems.

Feature Comparison

Capability

Trayd

eBacon

Certified payroll (WH-347 + state forms)

Yes

Yes

Prevailing wage rate management

Yes

Yes

Fringe trust for open-shop contractors

Not a stated feature

Yes

Union payroll and CBA compliance

Yes, core capability

Not prominently featured

General ledger and accounting

Yes, built in

No, integrates with existing accounting software

Accounts payable and receivable

Yes, built in

No

Job costing

Yes, integrated with accounting

Yes, labor cost tracking

Field and labor tracking apps

Yes

Yes (GPS time tracking)

HR, onboarding, and benefits

Yes, full suite

Yes, included

Crew scheduling and dispatch

Yes

Yes, included

Bilingual support (English/Spanish)

Yes

Not publicly stated

Feature data sourced from each platform's publicly available website and product documentation as of November 2026.

Who Is eBacon Best For?

eBacon is well-suited for small to mid-sized open-shop and merit-shop contractors (15–500 employees, per eBacon's stated target) who perform prevailing wage work and need a dedicated certified payroll and compliance platform alongside their existing accounting software. Contractors in this category typically share several characteristics:

  • Prevailing wage and certified payroll compliance are the primary back-office pain points

  • The company uses QuickBooks or another general accounting tool and wants to keep it

  • The workforce is primarily non-union, and the fringe trust feature offers tax savings on prevailing wage projects

  • Full construction accounting (GL, AP, AR) is handled elsewhere

Who Is Trayd Best For?

Trayd is built for trade and specialty contractors who need a unified back-office operating system that handles payroll, HR, compliance, accounting, and job costing in one platform. Contractors managing union labor, prevailing wages, multi-state compliance, and high-volume field crews, particularly those working on federally funded and public works projects, will find Trayd purpose-built for the full scope of their back-office operations.

​Schedule a demo to see how Trayd compares for your specific operation.

Frequently Asked Questions

Does eBacon include a general ledger or full accounting system?

No. eBacon is designed to work alongside a contractor's existing accounting software. The platform handles construction payroll, certified payroll, and compliance, while the accounting system manages the general ledger, AP, AR, and financial reporting.

Does Trayd handle certified payroll for open-shop contractors?

Yes. Trayd generates certified payroll reports for contractors on prevailing wage projects regardless of union or open-shop status.

What is eBacon's fringe trust?

eBacon's fringe trust allows open-shop and merit-shop contractors to direct prevailing wage fringe contributions into benefits rather than paying them as taxable cash, which can reduce payroll tax costs on covered projects.

Can eBacon replace QuickBooks for construction accounting?

eBacon does not include a general ledger or full accounting suite. Contractors using eBacon typically continue to use QuickBooks or another accounting platform for financial reporting while eBacon handles payroll and compliance.

Does Trayd support union payroll?

Yes. Trayd handles union logic, collective bargaining agreement compliance, multi-trade classification management, and union reporting as core platform capabilities.

How do the two platforms differ on job costing?

eBacon tracks labor costs by project for job costing purposes. Trayd integrates job costing with a full accounting suite, connecting labor data to the general ledger, AP/AR, and financial statements within one system.

About the Author

Anna Berger is the founder and CEO of Trayd, a construction payroll and compliance platform built for specialty contractors. Born into a construction family, Anna saw back office inefficiencies firsthand, and as a result, Trayd was developed to be the single back office operating system to manage people, payroll and the field. Trayd has raised $15M in venture funding from world-class investors like White Star Capital, Suffolk Technologies, Bloomberg Beta, and Y Combinator, and the team is based in New York City.

Anna Berger

Founder & CEO

More in this topic

Construction’s Payroll and Accounting Platform

Products

HR & People Management

Scheduling & Dispatch

Field & Labor Tracking

Payroll

Accounting

Solutions

Compliance

Job Costing

Job Profitability

Job Cost Accounting

Sign up for our product updates newsletter.

© 2026 Trayd Inc. All Rights Reserved.

Construction’s Payroll and Accounting Platform

Products

HR & People Management

Scheduling & Dispatch

Field & Labor Tracking

Payroll

Accounting

Solutions

Compliance

Job Costing

Job Profitability

Job Cost Accounting

Sign up for our product updates newsletter.

© 2026 Trayd Inc. All Rights Reserved.

Construction’s Payroll and Accounting Platform

Sign up for our product updates newsletter.

Download the App

Products

HR & People Management

Scheduling & Dispatch

Field & Labor Tracking

Payroll

Accounting

Solutions

Compliance

Job Costing

Job Profitability

Job Cost Accounting

© 2026 Trayd Inc. All Rights Reserved.